* ACF-50 is an excellent penetrant.
* ACF-50 provides excellent low-shear lubrication to moving parts and cables.
* ACF-50 kills any corrosion currently in progress with just one application.
* Removal of the corrosion by-product is not necessary.
* ACF-50 is good for rubber, preventing it from cracking or drying out.
* In most applications, ACF-50's unique properties will last for 24 months before it is consumed and needs to be re-applied.
* The ultra-thin-film does not attract and hold salt crystals and dirt particles.
* The ultra-thin film does not "dry". It stays a flexible liquid and therefore seals the surface better as the surface expands and contracts.
* ACF-50 will not displace or melt any grease which is already in place. It will mix with it and make it more efficient.
* ACF-50 will not harm any plastics or painted surfaces.
* ACF-50 can be safely applied to electronics such as radios, timers, test equipment, antenna connections, computers, etc. However, we recommend you avoid using it on LED's, LCD's and soft membrane switches.
* ACF-50 can be safely applied to electrical components such as alternators, starters, magnetos, generators, distributors, carburators, wiring, switches, rheostats, compressors, battery terminals, light bulb sockets, electrical connectors, circuit breakers, ignition systems, wire harnesses, etc.
* ACF-50 provides excellent low-shear lubrication to moving parts and cables.
* ACF-50 kills any corrosion currently in progress with just one application.
* Removal of the corrosion by-product is not necessary.
* ACF-50 is good for rubber, preventing it from cracking or drying out.
* In most applications, ACF-50's unique properties will last for 24 months before it is consumed and needs to be re-applied.
* The ultra-thin-film does not attract and hold salt crystals and dirt particles.
* The ultra-thin film does not "dry". It stays a flexible liquid and therefore seals the surface better as the surface expands and contracts.
* ACF-50 will not displace or melt any grease which is already in place. It will mix with it and make it more efficient.
* ACF-50 will not harm any plastics or painted surfaces.
* ACF-50 can be safely applied to electronics such as radios, timers, test equipment, antenna connections, computers, etc. However, we recommend you avoid using it on LED's, LCD's and soft membrane switches.
* ACF-50 can be safely applied to electrical components such as alternators, starters, magnetos, generators, distributors, carburators, wiring, switches, rheostats, compressors, battery terminals, light bulb sockets, electrical connectors, circuit breakers, ignition systems, wire harnesses, etc.
ACF-50 ANTI-CORROSION FORMULA
HOW IT WORKS: ACF-50, Anti-Corrosion Formula, is a state of the art, anti-corrosion lubricant compound, specifically designed for the Aero Space Industry. It is an ultra Thin Fluid Film Compound (TFFC) that actively treats metal using advanced polar bonding technology. As seen from the diagrams, ACF-50’s synthetic inhibitors and active chemistry penetrates through the oxide deposits (white powder) to the base of the corrosion cell where it emulsifies, encapsulates, and then lifts the electrolyte away from the metal surface. ACF-50 then allows this moisture to evaporate while providing an atmospheric barrier that prevents further moisture contact. With the electrolyte removed the corrosion process is halted. ACF-50 actively penetrates and “creeps” into the tightest seams, lap joints, micro cracks, and around rivet heads, displacing moisture and other corrosive fluids (orange juice, coke, coffee, salt water) in these corrosion prone areas. ACF-50’s thin film acts like an “OFF SWITCH” for corrosion remaining effective for up to 24 months
HOW IT WORKS: ACF-50, Anti-Corrosion Formula, is a state of the art, anti-corrosion lubricant compound, specifically designed for the Aero Space Industry. It is an ultra Thin Fluid Film Compound (TFFC) that actively treats metal using advanced polar bonding technology. As seen from the diagrams, ACF-50’s synthetic inhibitors and active chemistry penetrates through the oxide deposits (white powder) to the base of the corrosion cell where it emulsifies, encapsulates, and then lifts the electrolyte away from the metal surface. ACF-50 then allows this moisture to evaporate while providing an atmospheric barrier that prevents further moisture contact. With the electrolyte removed the corrosion process is halted. ACF-50 actively penetrates and “creeps” into the tightest seams, lap joints, micro cracks, and around rivet heads, displacing moisture and other corrosive fluids (orange juice, coke, coffee, salt water) in these corrosion prone areas. ACF-50’s thin film acts like an “OFF SWITCH” for corrosion remaining effective for up to 24 months
Aviation approvals - MIL-SPEC 81309 types II and III which means it is 'approved for ferrous and non-ferrous metals, electrical systems and electronic components'.
Some of ACF-50's OEM Approvals:
ATR Regional Transport
Boeing Helicopter
(McDonald Douglas Corporation)
CANADAIR
GULFSTREAM AEROSPACE
PILATUS AIRCRAFTBell Helicopter Textron
Bombardier Regional
Aircraft Division
Concorde Battery Corp.
Hiller Aircraft Corporation
Boeing Aircraft
(McDonald Douglas Helicopter Company)
British Aerospace
Extra Aircraft
LAKE AIRCRAFT
SIKORSKY AIRCRAFT
Ratheon Corp (Beech Aircraft Corp)
ATR Regional Transport
Boeing Helicopter
(McDonald Douglas Corporation)
CANADAIR
GULFSTREAM AEROSPACE
PILATUS AIRCRAFTBell Helicopter Textron
Bombardier Regional
Aircraft Division
Concorde Battery Corp.
Hiller Aircraft Corporation
Boeing Aircraft
(McDonald Douglas Helicopter Company)
British Aerospace
Extra Aircraft
LAKE AIRCRAFT
SIKORSKY AIRCRAFT
Ratheon Corp (Beech Aircraft Corp)
from Corrosion caused by
12 months protection
Rain/Snow
Road Spray
Road Salt
Environment
Condensation
